ShockWatch Clip – When to Use the Surface‑Mounted Impact Indicator
This article is part of our SpotSee® Knowledge Base.
ShockWatch Clip – When to Use the Surface-Mounted Impact Indicator
The ShockWatch® Clip is a compact, surface-mounted impact indicator for products that need direct, on-product monitoring rather than carton-level monitoring. Unlike adhesive labels or external indicators, the Clip attaches to the equipment or housing itself, giving a tamperproof, always-visible record of mishandling.
As an authorised SpotSee partner, Good Life Innovations helps manufacturers and logistics teams fit ShockWatch Clip into their packaging and quality-control processes.
What is the ShockWatch Clip?
A single-use mechanical impact indicator that holds one or two ShockWatch Tubes. When an impact above the selected G-level occurs, the indicator turns bright red, giving clear, irreversible evidence of mishandling that cannot be reset.
Because it mounts to the product, it suits equipment that may be repackaged, moved internally, or handled several times before reaching the end user. It stays with the product, not the packaging.
We supply it in 100 packs, in single-tube and double-tube versions. A double tube lets you monitor two sensitivities or two axes on the same fitting.
When to use ShockWatch Clip
- Products that are unpacked and repacked — medical devices, calibration-critical instruments, laboratory equipment, rental or demonstration units
- Internal logistics and multi-stage handling — the Clip stays with the product through assembly, testing, storage and distribution
- Equipment with rigid housings — industrial tools, optical systems, precision electronics
- Where tamperproof evidence is essential — mounted to the product, it cannot be removed or replaced unnoticed
ShockWatch Clip vs ShockWatch Label
| Feature | ShockWatch Label | ShockWatch Clip |
|---|---|---|
| Mounting location | On the packaging | On the product itself |
| Reusability | Single-use | Single-use |
| Tamper resistance | Moderate | High |
| Best for | General shipping | Equipment-level monitoring |
Fitting best practice
- Mount on a rigid, non-flexing surface
- Keep the indicator visible for inspection
- Select the sensitivity to match the fragility of the product
- Use secure mounting screws or adhesive pads as recommended
- Use Clip companion labels so handlers can see the equipment is monitored
Benefits
- On-product impact monitoring
- Highly tamper-resistant
- Suits multi-stage handling environments
- Supports warranty and quality-control processes
- Clear, irreversible evidence of mishandling
Other options in the range
- Smaller equipment: ShockWatch MiniClip, single or double tube, in a reduced footprint
- Curved or uneven surfaces: ShockWatch Flex, whose housing bends to the shape of the product
- Inside the product: see ShockWatch Tube – When to Use the Embedded Impact Indicator, which uses the same tube technology but is fitted during manufacture
- Carton-level monitoring: ShockWatch 2 QR impact indicators
Good Life Innovations Ltd is an Approved SpotSee Partner, supplying genuine ShockWatch® and TiltWatch® indicators across the UK.
Related SpotSee Guides
- ShockWatch MiniClip – When to Use the Compact Surface-Mounted Impact Indicator
- ShockWatch Tube – When to Use the Embedded Impact Indicator
- ShockWatch Clip vs MiniClip – Complete Comparison Guide
Part of our SpotSee® Knowledge Base
Explore our SpotSee® Knowledge Base for product guides, comparison articles and supporting technical resources for impact, tilt and temperature monitoring solutions.